The parameters of the "Picking Parts Axis" subset are between 400 and 599 :

• From parameters 400 to 449 : Counters

• From parameters 450 to 499 : Floats

• From parameters 500 to 549 : Integers

• From parameters 550 to 599 : Timers

List of essential parameters :

Counters :

Parameters #400 : Number of Eliminations at Sartup

Parameters #401 : Number of round trips for Elimination

Parameters #402 : Number of consecutive eliminations before stop IMM

Integers :

Parameters #505 : Ejector 1 output on time delay: #1 With #0 Without

Parameters #506 : Forcing Ejection 1 : #0 Program #1 ON #2 OFF

Parameters #507 : Ejector 1 retracted on time delay: #1 With #0 Without

Parameters #508 : Core 1 output on time delay: #1 With #0 Without

Parameters #509 : Forcing Core 1 : #0 Program #1 ON #2 OFF

Parameters #510 : Core 1 reentry on time delay: #1 With #0 Without

Parameters #511 : Forcing Blowing ejection 1 : #0 Program #1 ON #2 OFF

Parameters #512 : Ejector check 1 retracted: #1 Enable #0 Disable

Parameters #513 : Vacuum switch control : #1 With #0 Without

Timers :

Parameters #550 : Suction Time to pick parts in the mold

Parameters #551 : Blowing time for unloading

Parameters #552 : Released suction for unloading

Parameters #553 : Delay before release elimination suction

Parameters #554 : Released suction for elimination

Parameters #555 : Suction Time to pick parts in the mold

Parameters #557 : Time Out Downstream

Parameters #560 : Delay before ejection command 1 IMM

Parameters #561 : Ejection command 1 IMM

Parameters #562 : Ejection 1 IMM back

Parameters #563 : Delay before core command 1 IMM

Parameters #564 : Core Command 1

Parameters #565 : Core 1 Back

Parameters #566 : Delay before blowing command 1 IMM

Parameters #567 : Blowing command 1 IMM