Spark KB > Diagnostic Stacker Axis Step

    

Diagnostic Stacker Axis Step

If any of the steps in the Stacker Axis subset are listed below, check the information in the description:


STEP:   

DESCRIPTION:

0.2

Check that there is the following input: "Downstream/ Stacker in Picking".

Check that there is not the following input: "Downstream/ Stacker in Laying".

0.3

Check that there is not the following input: "Downstream/ Stacker in Laying".

0.5

Stacker axis motion has not started, check axis mechanics.

0.6

First of all, check that there is the following input: "Downstream/ Stacker in Picking" and check that there is not the following input:"Downstream/ Stacker in Laying".

Otherwise, Stacker axis movement has not been completed, check axis mechanics.

0.13

Stacker axis motion has not started, check axis mechanics.

0.14

Stacker axis movement has not been completed, check axis mechanics.

0.15

First of all, check that there is the following input: "Downstream/ Stacker in Laying" and check that there is not the following input:"Downstream/ Stacker in Picking".

Otherwise, Stacker axis movement has not been completed, check axis mechanics.

0.17

Stacker axis motion has not started, check axis mechanics.

0.18

First of all, check that there is the following input: "Downstream/ Stacker in Laying" and check that there is not the following input:"Downstream/ Stacker in Picking".

Otherwise, Stacker axis movement has not been completed, check axis mechanics.

0.9

First of all, check that there is the following input: "Downstream/ Stacker in Laying" and check that there is not the following input:"Downstream/ Stacker in Picking".

Otherwise, Stacker axis movement has not been completed, check axis mechanics.

0.23

Stacker axis motion has not started, check axis mechanics.

0.24

Stacker axis movement has not been completed, check axis mechanics.

0.26

Stacker axis movement has not been completed, check axis mechanics.

0.27

Check that there is the following input: "Downstream/ Stacker in Picking" and check that there is not the following input:"Downstream/ Stacker in Laying".

0.25

Stacker axis movement has not been completed, check axis mechanics.

0.28

Stacker axis movement has not been completed, check axis mechanics.